The use and characteristics of multi-stage slurry pump

1. The magnetic drive pump is mainly composed of suction section, discharge section, impeller, guide vane, inner magnetic steel, outer magnetic steel, isolation sleeve, motor, etc. In the sealing body of the pump, the motor drives the outer magnet, and the outer magnet drives the inner magnet, so that the impeller rotates, and then the dynamic seal is replaced by a static seal, so that the overcurrent parts of the pump are completely sealed without leakage.

2. Select special intensive, magnetic-gathering, push-pull magnetic circuit coupling magnetic drive equipment, which has the advantages of compact structure, small volume, large torque, small eddy current, high magnetic transmission power, and stable and reliable operation.

3. It has a variety of unique axial force balance methods for the magnetic drive pump, so that the axial force at the pump end is approximately zero, the wear rate of the sliding bearing and the thrust bearing is low, the failure rate is low, and the service life of the pump is long.

4. Using the latest technology to optimize the design of the impeller guide vanes, modularize the structure and components of the magnetic pump, and combine with the unique manufacturing process to reduce the various losses that affect the power of the magnetic pump to a minimum. The lower limit then makes the power of the magnetic pump essentially the same as the power of the mechanical seal pump.